BIM Revit Architecture + Revit MEP Complete Course

Teacher: Ramo Khem fiber_manual_record BIM Instructor at UCLA Extension

Teacher: Taco Pover fiber_manual_record BIM Manager

34

Course length

85

Lessons

Final Certification

Unlimited support

Unlimited access

The course teaches how to design with the Building Information Modeling (BIM) method through BIM softwares.

The BIM method - or the digital representation of physical and functional characteristics of a facility - is a cutting-edge design method, which minimizes errors and maximizes efficiency.

For these reasons it will be increasingly adopted in the future. The USA, UK and Northern Europe have already adopted it since many years, and it will grow to play an even more crucial role in building documentation in the future.

The first part of this course focuses on BIM softwares and consists of three packages - basic, intermediate and advanced. The course’s aim is to explain all the major features of the BIM softwares on a deeper level through detailed video courses. This course welcomes both first-time users of the software and those already familiar but want to learn more.

The second part addresses the BIM MEP (Mechanical, Electrical and Hydraulic Systems) discipline; this module demonstrates how to design an entire plant through building engineering (via management of spaces, ducts, fittings, unions, drains, etc.) and to process advanced calculations and parameters.

Everyone who wishes to learn how to design with Building Information Modeling at an advanced level should purchase this course. In turn, you will be able to minimize errors and speed up processes, whether you are starting from scratch or already have a basic knowledge of BIM softwares.

The course also includes the registration to a dedicated Facebook group for any clarifications, questions or insights to be discussed with the teacher.

  • When does the course start?
    Once purchased, the course will be immediately available on your account! You will decide when to start the course and all lessons will be available on your account for 5 years.
  • How does the course take place?
    The course consists of pre-recorded video lessons that you can watch at any time and from any device. The lessons will be available on your account for 5 years!
  • Where can I find a trial lesson?
    You can get a free trial lesson of the course by sending an email to admin@gopillar.com
  • Where can I find a lesson plan?
    You can get the detailed lesson plan of the course by sending an email to admin@gopillar.com
  • Will I get a certificate at the end of the course?
    Yes sure. At the end of the course, you will automatically receive the GoPillar Academy certificate of participation, which you can add to your curriculum or Linkedin profile.
  • Do the lessons have an expiration date?
    Once you enroll in the course, you will have unlimited access to all the video lessons for 5 years, you can view them at any time, as many times as you want and from any device.
  • Will I be able to interact with the teacher during the course?
    Absolutely yes, we have created a special Facebook group called GoPillar Academy English that is moderated by our teachers. Anyone who has purchased at least one of our courses can register to the group to ask questions and request clarifications.
  • Where does the course take place?
    Our video courses take place entirely online, so you can enjoy them directly from your home! All our courses, in fact, consist of pre-recorded video lessons that you can watch at any time and from any device.
  • Who can I contact if I have questions or need support?
    For any information, contact us sending an email to admin@gopillar.com or through the chat that you find here at the bottom right. Furthermore, once you have purchased one of our courses, you will have access to our support group on FB, where you can interact with all the GoPillar Academy teachers.
  • How can I enroll to the course?
    You can enroll to the course directly from this page, by clicking on the "Enroll" button and entering your data to create an account and the data of any credit card, prepaid card or PayPal account for the payment of the registration fee.
  • What payment methods do you accept?
    GoPillar Academy Subscription can be paid with any credit card, prepaid card or PayPal account.

Revit MEP Complete Course (18 Hours)

file_download

Course Materials

play_circle_outline

Lesson 1 - Download and installation of Revit

play_circle_outline

Lesson 2 - Interface

play_circle_outline

Lesson 3 - View and navigation

play_circle_outline

Lesson 4 - Project browser

play_circle_outline

Lesson 5 - Selection and parameters

play_circle_outline

Lesson 6 - Category overrides

play_circle_outline

Lesson 7 - Keyboard shortcuts and modify

question_answer

Section 1 - Final Test

play_circle_outline

Lesson 8 - Linking and copy monitor

play_circle_outline

Lesson 9 - Creating views

play_circle_outline

Lesson 10 - Creating view templates

play_circle_outline

Lesson 11 - Creating arch views

play_circle_outline

Lesson 12 - Creating spaces

play_circle_outline

Lesson 13 - Worksharing

question_answer

Section 2 - Final Test

play_circle_outline

Lesson 14 - Loading families

play_circle_outline

Lesson 15 - Placing families

play_circle_outline

Lesson 16 - Placing air terminals

play_circle_outline

Lesson 17 - Placing ducts

play_circle_outline

Lesson 18 - Creating duct types

play_circle_outline

Lesson 19 - Creating pipe types

play_circle_outline

Lesson 20 - Accessories and cable tray types

play_circle_outline

Lesson 21 - Electrical categories

play_circle_outline

Lesson 22 - Schedules

question_answer

Section 3 - Final Test

play_circle_outline

Lesson 23 - Create system type and filters

play_circle_outline

Lesson 24 - More filters

play_circle_outline

Lesson 25 - Shared parameters

question_answer

Section 4 - Final Test

play_circle_outline

Lesson 26 - Loading and placing fixtures

play_circle_outline

Lesson 27 - Create electrical circuits

play_circle_outline

Lesson 28 - Create panel schedule (1)

play_circle_outline

Lesson 29 - Create panel schedule (2)

play_circle_outline

Lesson 30 - Lighting fixtures calculations

question_answer

Section 5 - Final Test

play_circle_outline

Lesson 31 - Duct networks layouts

play_circle_outline

Lesson 32 - Air terminals in reflected ceiling plans

play_circle_outline

Lesson 33 - Fan coil unit and grouping

play_circle_outline

Lesson 34 - Plumbing fixtures and sanitary pipes (1)

play_circle_outline

Lesson 35 - Plumbing fixtures and sanitary pipes (2)

question_answer

Section 6 - Final Test

play_circle_outline

Lesson 36 - Warnings and errors

play_circle_outline

Lesson 37 - Interference checking

question_answer

Section 7 - Final Test

play_circle_outline

Lesson 38 - Setting up sheets (1)

play_circle_outline

lesson 39 - Setting up sheets (2)

play_circle_outline

Lesson 40 - Setting up sheets (3)

question_answer

Section 8 - Final Test

play_circle_outline

Lesson 41 - Annotations

play_circle_outline

Lesson 42 - Create tag

play_circle_outline

Lesson 43 - Create electrical tag

play_circle_outline

Lesson 44 - Create mechanical tag

play_circle_outline

Lesson 45 - Drafting views and legends

question_answer

Section 9 - Final Test

play_circle_outline

Lesson 46 - Printing and exporting IFC

play_circle_outline

Conclusions

question_answer

Section 10 - Final Test

Revit BIM Architecture Complete Course

file_download

Course Materials

play_circle_outline

Introduction

play_circle_outline

Lesson 1 - Launching Revit, Commands & Shortcuts

play_circle_outline

Lesson 2 - Configuration & Sensitivity

play_circle_outline

Lesson 3 - Navigation, Selection & Multiple Windows

play_circle_outline

Lesson 4 - Global Options & Templates

play_circle_outline

Lesson 5 - Workshare

play_circle_outline

Lesson 6 - Project Data & Levels

play_circle_outline

Lesson 7 - Walls & Dimensions

play_circle_outline

Lesson 8 - Custom Walls & Grids

play_circle_outline

Lesson 9 - Interior Walls, Store Front & Modify Tools

play_circle_outline

Lesson 10 - Doors, Windows & Modify

play_circle_outline

Lesson 11 - Circulation & Paste to Views

play_circle_outline

Lesson 12 - Slab, Deck & Shaft Openings

play_circle_outline

Lesson 13 - Ceiling Systems & View Range

question_answer

Basic Level - Final Test

play_circle_outline

Lesson 14 - Elevations, Sections & Cameras

play_circle_outline

Lesson 15 - Kitchenette

play_circle_outline

Lesson 16 - Restrooms

play_circle_outline

Lesson 17 - Classroom & Ceiling Fixture

play_circle_outline

Lesson 18 - Hip Roof

play_circle_outline

Lesson 19 - Gable, Flat & Design Options

play_circle_outline

Lesson 20 - Curtain Walls

play_circle_outline

Lesson 21 - Room Tag & Door Tag

play_circle_outline

Lesson 22 - Schedule, TakeOff & Table Appearance

play_circle_outline

Lesson 23 - Toposurface, Site Components & Parking

play_circle_outline

Lesson 24 - Exterior Lighting, Sun Path and Rendering

play_circle_outline

Lesson 25 - Section Render & Material Adjustment

play_circle_outline

Lesson 26 - Render Dialogue

play_circle_outline

Lesson 27 - Interior Rendering

play_circle_outline

Lesson 28 - Cloud Render & Walk-Throughs

question_answer

Intermediate Level - Final Test

play_circle_outline

Lesson 29 - Graphic Display & Override

play_circle_outline

Lesson 30 - Materials

play_circle_outline

Lesson 31 - Selection Set

play_circle_outline

Lesson 32 - Displaced Elements

play_circle_outline

Lesson 33 - Contract Documents

play_circle_outline

Lesson 34 - Presentation Board

play_circle_outline

Lesson 35 - Project Location and Markers

play_circle_outline

Lesson 36 - Linking Files

play_circle_outline

Lesson 37 - Parametric Family

play_circle_outline

Lesson 38 - Nested Family

question_answer

Advanced Level - Final Test

Ramo Khem
BIM Instructor at UCLA Extension
Ramo Khem is an US architect graduated with full marks from the University of Hawaii at Manoa. After his degree he took a specialization master to become a BIM Certified Professional at the University of Washington. For over fifteen years, he has worked for different disciplines, with the responsibility of conceptualizing, planning, and implementing Revit models for MEP systems, Architectural designs and Construction Management.  In addition, he worked closely with construction teams to oversee contract-related BIM requirements for projects, which includes requirements of schedule, trade coordination (clash detection) and asset data requirements for system model objects. He currently works as a solution manager with BIM focus at Herzog Contracting Corp. in Long Beach, CA. He also hold a position as BIM Instructor as UCLA Extension, the professional continuing education division of UCLA.  
View More


Taco Pover
BIM Manager
Taco Pover is a BIM manager for Ingenieursburo Linssen; an engineering company in the Netherlands. He has been working with Revit for more than 10 years. Taco started his career as an electrician on site, but soon found out that his passion was computer aided design. From there on out he started learning Autocad and the mechanical and plumbing side of design after which Revit made its entry. One of his personal projects is creating and maintaining a custom Dynamo package called ‘MEPover’ that focuses on Dynamo nodes for MEP design. Another personal project is using Unreal Engine to bring Revit models into Unreal Engine for creating visuals and interactive walkthroughs.
View More


Chat with usWe will get back to you as soon as possible
Hi, do you need info about any of our courses?
type your message